The following instructions descrie how to creating a
new Windows NT dialup connection to Nippy
NOTE: You will need your NT4 installation media (probably
a CD) to complete this installation
1)
|
The first thing you have to do is install Dial-up
Networking. To do this, double click the 'My Computer'
icon on your desktop. |
2)
|
Double click the 'Dial-up Networking' icon
within the window that opens up. |
3)
|
You should click 'Install' on this window. |
| 4) |
Once Dial-up Networking is installed you will be
presented with a warning that the phone book is empty.
Click 'OK' |
| 5) |
Type in a phonebook name such as 'Nippy'.
Click 'Next'. |
| 6) |
On this screen you should have to tick all three
tickboxes, click 'Next'. |
7)
|
Type in 0844 535 2000 into the 'Telephone
number box' and leave 'Use Telephony dialing
properties' unchecked. Click 'Next'. |
| 8) |
On this screen, select 'Point-to-Point Protocal
(PPP)' and Click 'Next'. |
| 9) |
On this screen, select 'None. Click 'Next'. |
| 10) |
On this screen, leave 'My IP address' as 0's.
Click 'Next'. |
11)
|
On this screen, leave 'DNS server' and 'WINS
server' as 0's. Click 'Next'. |
| 12) |
Click 'Finish' on this screen. |
| 13) |
On the next screen, click 'More' and select
'Edit entry and modem properties'. |
| 14) |
Select the 'Server' tab at the top of the
window.
|
| 15) |
Select 'PPP: Windows NT, Windows 95 Plus, Internet'
from the 'Dial-up server type'. Select 'TCP/IP'
and leave all other boxs unchecked. Click 'Next'. |
| 16) |
On this screen, select 'Server assigned IP address'
and 'Server assigned name server addresses'.
All fileds will contain 0's and the bottom two options
must be selected. Click 'OK' to each of the
open windows until you are back to step '13' |
17)
|
On this screen click 'Dial' |
18)
|
On this final screen, type in your 'username'
(nippy) and your 'password' (internet) and
select the 'Save password' box and click 'connect'.
You will now be connected to your Nippy connection.
|
